This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

Want precision? – Why not try an Endecotts Sieve?

05 October 2012

Endecotts test sieves not only look good but are designed and manufactured to offer qualities that make them extremely precise and accurate whilst offering good handling, nesting and strength.

Each sieve is individually made under the most stringent quality control procedures using only the finest materials. The wirecloth is checked at every stage of manufacture either by optical projection or highly sophisticated computer scanning techniques.

The final inspection is a precision measurement of apertures, and sieve frame dimensions. Only when we are satisfied it meets our exacting standards do we give it an Endecotts Certificate of Conformity certifying that the sieve complies to the ISO 3310 / ASTM E 11 or other International specification.

Whether it’s standard Test Sieve or something special for industries such as diamond, coffee or agriculture you’ll find the same meticulous quality in design and manufacture.

Endecotts sieves are supplied in complete range of aperture sizes, diameter sizes, depths, choice of materials and certified degrees of inspection to meet virtually every requirement.

Wet washing sieves are extremely useful sieves where samples need to be separated with the help of wet washing. Available in 8 inch diameter by 4 or 8 inches deep or their metric equivalent with brass or stainless-steel frames. A complete range of aperture sizes with optional support medium for fine mesh.

Endecotts microplate sieves are made from electro-formed nickel plate in stainless-steel frames of 100mm or 200mm diameter. Available with unique self-clearing apertures sizes from 75 to 5 microns. Microplate sieves are supplied with either round or square holes.

These sieves are specifically designed for use with air jet systems and are available in 200 mm diameter brass or stainless-steel frames and an extensive range of aperture sizes.

Extensively used by the construction and cement industries. These extra depth sieves are available with a diameter size of 450 mm and a depth of 300 mm. Made from stainless-steel with woven wire mesh or perforated plate sieving mediums.

Where smaller quantities of sample are being analysed half height sieves are often used.
These sieves are available in diameters of 100, 200 or 300mm and 3, 8 or 12 inches with the complete range of woven wire mesh or perforated plate sieving media.

These sieves are specially designed for the coffee industry - and used for grading coffee beans. They are manufactured with brass or stainless-steel frames of 8"/200 mm and fitted with round hole, stainless-steel perforated plate. A complete range is available based on the '64th in.' standard measurements.

Grain Sieves, specially manufactured to meet the requirements of ISO 5223. They are also used by Government Intervention Boards and similar organisations worldwide for testing grains and cereals.

Available in 200 mm diameter brass or stainless-steel frames in full or half height depths with mild or stainless-steel slotted plate.

To download the Test Sieving Manual please click here

For further information on Endecotts products please email: 

+44 (0) 208 542 8121 or visit

Contact Details and Archive...

Print this page | E-mail this page