This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

Oriental Motor’s BLE2 BLDC motors are rated to IP66

23 January 2023

The compact and robust BLE2 brushless DC (BLDC) motors are ideal for use in a broad range of applications within the food processing industry.

Oriental Motor’s BLE2 BLDC is sealed to IP66 and ideal for use in the food processing industry.
Oriental Motor’s BLE2 BLDC is sealed to IP66 and ideal for use in the food processing industry.

One of the major advantages of BLDC technology over traditional inverter induction motor solutions is the compact size of the motors, typically being around half the size and weight of a comparable induction motor solution. This coupled with the larger speed range and higher speed stability tolerances makes BLDC motors a superior motor technology for all applications.

Oriental Motor offers a wide range of brushless DC (BLDC) motor technologies that include the BLE2 series. Motors in the BLE2 series are rated to IP66 and available in  a range of power options from 30 to 300W. Additionally these units have a speed range of between 80 to 4000 RPM, meaning one motor gearhead combination can be used for a variety of applications resulting in fewer parts being needed to be held for spares.

The motors are also equipped with alarm and torque monitoring functions for safe operation and control. The design also includes a torque control function for winding applications, which acts in a similar way to an electronic clutch. Electromechanical brake options are also available.

The speed or torque can be adjusted via an analogue output and/or the user can set 16 programmable speeds, depending on the required motion profile requirements. 

Snap-on, easy to use, IP-rated motor connectors ensure quick and secure wiring where the user can select lengths of cable, from 1 to 20m so that an appropriate length can be specified.  

The motors use an EURONORM X 10 CrNiS18 9 stainless steel shaft and there is a varied selection of gear types, including spur gear, hollow shaft gear and foot mounted options.

The BLE2 motor and driver can be programmed using the free-of-charge software MEXE02 suite (downloadable via Oriental Motor’s website). Set-up can be via a PC using the software or via a PLC. The software can be used for troubleshooting and to make maintenance, fault finding and setup easier.


Contact Details and Archive...

Print this page | E-mail this page