This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Portable high precision sensor measurement tool for test, calibration and fault finding

06 July 2015

Now available in the UK from Ixthus Instrumentation, Burster’s new TRANS CAL 7281 is a high precision hand-held portable test and calibration tool for sensor components used on equipment such as hydraulic presses, torque tools, high precision measuring devices and pressure-regulating systems on assembly lines. 

The battery or mains powered instrument supports strain gauge/normalized signal ± 5 V, ± 10 V, and potentiometric sensors; and includes a strain gauge simulator up to 50 mV/V. Combined with a reference sensor the device provides a high-precision reference measurement chain for force or torque etc. The compact instrument can also be used for routine testing to measure and record isolation resistances and input/output resistances, and as a fault-finding tool for service engineers. An optional factory calibration certificate and/or German accredited DAkkS calibration certificate is available when the measurement device needs to be used as a reference. 

The TRANS CAL 7281 can store up to sixteen programs and has a data logging capacity of 30,000 measurements which can be shared and transferred to a PC with Burster’s DigiCal configuration and data-acquisition software for display and reporting functions which also includes test certificates compilation. Furthermore Burster’s TEDS software can be used to automatically load measuring chain values.

A dedicated version for reference measuring chain of compression load from 20 N to 100 kN with DKD/DAkkS calibration certificate is also available. The 72-REF-EN version uses the full featured 7281 for the calibration of press-fit force measuring equipment and is typically used with Burster’s high precision 8527 series sensor and is supplied all connection cabling and DigiCAL PC software.


Contact Details and Archive...

Print this page | E-mail this page

RELATED CONTENT...


Article image Why is weight calibration important?

Good practice guidelines advise that regular checks on the condition and accuracy of weights should be performed.Full Story...

Article image New Techne calibration catalogue

A 52-page catalogue with information about the full Techne range of thermal calibration equipment is now available from Bibby Scientific. A major section describes the Tecal series of portable dry-block calibrators. Full Story...

RELATED SPONSORED ARTICLES...


Article image Why is weight calibration important?

Good practice guidelines advise that regular checks on the condition and accuracy of weights should be performed.Full Story...

MOST VIEWED...


Article image Spray and save on the glazing process

Food glazes are widely used in the bakery sector to improve the look and taste of baked products. Traditionally, this coating process has resulted in substantial waste. Technology advances mean that this is no longer the case. Full Story...

Article image Your flexible friend in the food factory

Suzanne Gill finds out where thermal imaging technology can help around the factory. Full Story...

What role does refrigeration play in the supply chain?

A dry-ageing process improvement

Self diagnostics: an enabler for predictive maintenance

http://www.appetite4eng.co.uk