This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Exposure to high temperatures

10 December 2014

Now may be the time to investigate available solutions to the problem of overheating panels. Rittal have a large range of cooling products that will address the problem.

Rittal’s TopTherm fan-and-filter units are an energy efficient means of cooling enclosures but require a clean and cool environment to operate effectively. Air-to-air heat exchangers have separate internal and external air paths, preventing dirt and dust from entering the panel, but still require a cool ambient air to deliver the required cooling.

Cooling units also have separate air circuits but are capable of cooling the air inside an enclosure to a temperature lower than that of the ambient as well as maintaining a clean internal environment. In the case of thermoelectric coolers, the Peltier effect is used to deliver modest amounts of cooling, typically to small panels, offering a lightweight and compact solution. Units from the Rittal TopTherm Blue e range incorporate a refrigerant circuit and so have larger nominal cooling capacities, up to 4 kW.

Air-to-water heat exchangers can maintain the air inside a panel at a temperature lower than that of the surrounding air and have an additional benefit of allowing heat to be dissipated remotely. Water is the cooling medium used to transport thermal energy to an alternative location, where it may be discharged without increasing the temperature in an already warm environment. To complete the chilled water system a Rittal chiller can be used to return the water to its’ original condition before recirculating to the heat exchanger.


Contact Details and Archive...

Print this page | E-mail this page

MOST VIEWED...


Article image Spray and save on the glazing process

Food glazes are widely used in the bakery sector to improve the look and taste of baked products. Traditionally, this coating process has resulted in substantial waste. Technology advances mean that this is no longer the case. Full Story...

Article image Your flexible friend in the food factory

Suzanne Gill finds out where thermal imaging technology can help around the factory. Full Story...

Self diagnostics: an enabler for predictive maintenance

A dry-ageing process improvement

What role does refrigeration play in the supply chain?

http://www.appetite4eng.co.uk