This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Bürkert releases new flowmeters for high volume gases

29 August 2014

The key to precise metering and control of gases is ensuring that the equipment installed to perform the task is accurate, reliable and capable of integrating with other system controls.

Bürkert Fluid Control Systems has perfected the art of gas handling, with a range of monitoring and control products which has now been extended by the introduction of two new gas flowmeters.

Bürkert has considerable experience and expertise in gas handling technology and has developed a number of products which can be applied to a wide range of gas applications. The latest additions are the Type 8007 and Type 8008 flow meters, which are designed for measuring especially large flow rates.

The main issue with measuring the flow of gas is that the accuracy can be reduced by changes in temperature and pressure. By using the calorimetric principle of flow measurement, the accuracy of these new flowmeters can be assured since it is unaffected by changes in temperature and pressure.

Both of the new products use this method of measurement which requires no moving parts, thereby not only increasing the overall reliability, but also providing relatively high accuracy at low flow rates. Both meters provide a 4-20mA analogue output signal which can be used to control a huge range of components such as process control valves and solenoid valves either directly or via a PLC.

The Type 8008 is designed for pipe sizes up to 2" and can used to monitor air supplies as well as for measuring other gases. The flowmeter has an integral display which can be configured to display the measured flow in a variety of units as well as maintaining a value for the total volume measured. As standard, the maximum flow is 825 Nm3/h, with special flow ranges available on request, while the maximum operating pressure is 16 bar.

The Type 8007 flowmeter can be used in pipe diameters ranging from 1/2" up to 12" (DN300) and it features a depth scale that ensures that the sensor is correctly positioned within the pipe. Available in 3 versions: Basic, Extended and Maximum, each calibrated for a velocity range, 85.2 m/s, 170.1 m/s and 206 m/s respectively. The capacity of this product type ranges from 41 Nm3/h for 1/2" pipe up to 44,030 Nm3/h for a Maximum version installed in a 12" pipe, with a maximum operating pressure of 50 bar.


Print this page | E-mail this page

MOST VIEWED...


Article image Spray and save on the glazing process

Food glazes are widely used in the bakery sector to improve the look and taste of baked products. Traditionally, this coating process has resulted in substantial waste. Technology advances mean that this is no longer the case. Full Story...

Article image Getting the Industry 4.0 journey started

Suzanne Gill finds out why the UK food industry needs to embrace the idea of Industry 4.0 and why the journey needs to start now. Full Story...

Oil-free compressor breaks with tradition

Don’t get left out in the cold this Christmas

Your flexible friend in the food factory

http://www.appetite4eng.co.uk