This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

https://servedby.flashtalking.com/click/2/82776;2714294;369307;211;0/?ft_width=1&ft_height=1&url=16151650

Sponsored Article

Want precision? – Why not try an Endecotts Test Sieve?

28 June 2013

Endecotts Test Sieves not only look good but are designed and manufactured to offer qualities that make them extremely precise and accurate whilst offering good handling, nesting and strength.

Endecotts sieves are used extensively in the agriculture industry for the analysis of grains, beans, lentils, rice and similar commodities.

Each sieve is individually made under the most stringent quality control procedures using only the finest materials. The wirecloth is checked at every stage of manufacture either by optical projection or highly sophisticated computer scanning techniques. The final inspection is a precision measurement of apertures, and sieve frame dimensions. Only when we are satisfied it meets our exacting standards do we give it an Endecotts Certificate of Conformity. 

Endecotts Test Sieves are available in different sizes, depths, materials and certified degrees of inspection to meet every National and International standard and virtually every specification, including ISO 3310 and ASTM E-11. 

Endecotts test sieves can be supplied to a variety of different inspection levels depending on the information requirements specified.  
 
Certified Test Sieves
Each test sieve is appropriately inspected individually numbered to provide full traceability and supplied with a Certificate of Conformity to ISO 3310, ASTM -E-11 or other international specifications.

Inspected Test Sieves 
Each sieve is supplied with an Inspection Certificate stating separately the values for the average aperture in both the warp and weft directions of the wire cloth.

Mid Point Sieves 
Test Sieves with the sieving medium specification tolerances reduced by 30%. Each sieve is supplied with a Calibration Certificate giving the range of tolerances and measurements taken.

Calibrated Test Sieves
Each sieve is supplied with a calibration certificate recording the number of aperture and wire diameters measured, the average aperture size and standard deviation separately for the warp and weft direction. The type of weave will also be stated.

To download our ‘Test Sieving manual’ please click here.

For further information on Endecotts products please email: sales@endecotts.com
telephone: +44 (0) 208 542 8121 or visit www.endecotts.com


More information...

Contact Details and Archive...

Print this page | E-mail this page

MOST VIEWED...


Article image Getting the best out of PLCs

PLCs are something of an industry giant, so why is there still apprehension when engineering issues arise? Food Processing investigates.Full Story...

Article image Anheuser-Busch InBev’s distribution strategy model

Over the past 10 years Anheuser-Busch InBev (A-B InBev) has grown its global distribution network using a strategy which goes against the grain for traditional brewery specifications. In place of cost and time intensive permanent structures, it has adopted a design-driven approach in partnership with Herchenbach, a manufacturer of temporary buildings and semi-permanent warehouses. Full Story...

What role does refrigeration play in the supply chain?

Gently does it

Hygienic drainage for food safety

http://www.fponthenet.net/whitepapers.aspx?ShopItemID=1231