This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Filter elements tested to ensure air quality

15 February 2013

As a supplier of compressed air filter elements to the UK market, Hi-line Industries Ltd undertakes full test and air quality analysis of the filter media that it supplies.

Now the service is also available to cover the testing of any filtration media products, including competitors’ equipment. The choice of the correct filter element is said to have a direct effect on operational costs and experience shows that the air quality can help minimise or even eliminate unnecessary costs.

Following investments in state-of-the-art testing equipment including particle counters, flow meters, mass flow controllers and dewpoint meters, Hi-line provides a test facility to measure the efficiency of filter elements. Tests indicate compliance with ISO 8573-1:2010, being the international standard for compressed air quality. This standard lays down minimum air quality standards and defines allowable content levels for dirt, water and oil.

During the compression cycle, any inherent air particulates (dust, pollen, water etc) are drawn into the compressor and entrained into the compressed air stream which typically can be at seven times normal atmospheric conditions. Added to this stream is the carbon, oil and metallic debris from the compression process, generating a potentially toxic and destructive cocktail within the compressed air stream. Even for general factory applications, such contaminated air supplies are not acceptable. Where the compressed air supplies are for food contact, dental or breathing air requirements, then stricter quality regulations come into force for these applications.

As a major contaminant of compressed air systems, oil aerosols (minute droplets of oil suspended in the air stream) can be partially removed by coalescing filters in condensate form. Heavier oil contaminates appears as wall flow, with the liquid oil creeping along the inner surface of the air pipeline. Vapours or oil mist in a cloud form are not removed by coalescing filters. Micro organisms which can also proliferate in a compressed air system can be inhibited by maintaining a pressure dewpoint of better than -26°C.

To avoid unnecessary damage of equipment or contamination in downstream process lines, it is recommended that adequate testing of all filter media should be undertaken. For further information on breathing air, dental air, BRC and BCAS food grade air quality standards both contact and non-contact air, filter testing and general air analysis contact Hi-line Industries Ltd.


Contact Details and Archive...

Print this page | E-mail this page

RELATED CONTENT...


Article image Consistometer: Let it flow!

The Consistometer is a low cost, durable, instrument for accurately checking laboratory or production samples against consistency, viscosity or flow rate standards.Full Story...

RELATED SPONSORED ARTICLES...


Article image Consistometer: Let it flow!

The Consistometer is a low cost, durable, instrument for accurately checking laboratory or production samples against consistency, viscosity or flow rate standards.Full Story...

MOST VIEWED...


Article image Spray and save on the glazing process

Food glazes are widely used in the bakery sector to improve the look and taste of baked products. Traditionally, this coating process has resulted in substantial waste. Technology advances mean that this is no longer the case. Full Story...

Article image Getting the Industry 4.0 journey started

Suzanne Gill finds out why the UK food industry needs to embrace the idea of Industry 4.0 and why the journey needs to start now. Full Story...

Your flexible friend in the food factory

Don’t get left out in the cold this Christmas

Automating the temperature monitoring task

http://www.appetite4eng.co.uk