This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

https://servedby.flashtalking.com/click/2/82776;2714294;369307;211;0/?ft_width=1&ft_height=1&url=16151650

Design of automated instruments easy with Reliance Cool Muscle

21 February 2011

Reliance Precision Mechatronics LLP has made available a range of fieldbus interfaces for its Cool Muscle intelligent motors

Each Cool Muscle is complete with its own 50000 count encoder, vector drive and fully closed-loop control system and can be user-programmed for a wide range of applications: accurate point to point motion can be combined with velocity, acceleration, jerk and torque control at speeds from 0.0012 RPM to 3000 RPM.

Reliance Cool Muscle is available in two frame lengths and NEMA sizes 11, 17 and 23 for torques up to 0.87 Nm continuous (1.24 Nm peak). Clusters of up to 15 Cool Muscle motors can be interconnected in a daisy chain arrangement to create a tightly coordinated multi-axis system with no additional supervisory controller.

RS232 and MODBUS RTU protocols are standard and now optional PROFIBUS, CANopen, Ethernet and EtherNet/IP modules can be fitted for direct integration with a wide range of PLCs, fieldbuses and standard computer networks. Reliance Cool Muscle gives designers the opportunity to reduce system component count and wiring complexity or extend existing designs without adding new modules to the PLC or fieldbus.

Cool Muscle's on-board digital and analogue inputs and outputs can be used to attach sensors and control peripheral equipment from the fieldbus backbone. If one Cool Muscle motor in a cluster is equipped with a PROFIBUS interface then all the motors in the cluster can be controlled by the PLC.

Cool Muscle's power-saving minimum-current controller and single 24V DC supply make it suitable for mobile, battery-powered applications.

Reliance Cool Muscle is a highly flexible, low-cost motion system. Combined with Reliance Precision Mechatronics' wide range of rotary and linear precision mechanical components and backed by specialist support pre- and post-sales, Cool Muscle based pre-built and custom-designed actuators are ideal for one-off laboratory test equipment through to medium volume end-user equipment.


Contact Details and Archive...

Print this page | E-mail this page

MOST VIEWED...


Article image Getting the best out of PLCs

PLCs are something of an industry giant, so why is there still apprehension when engineering issues arise? Food Processing investigates.Full Story...

Article image Anheuser-Busch InBev’s distribution strategy model

Over the past 10 years Anheuser-Busch InBev (A-B InBev) has grown its global distribution network using a strategy which goes against the grain for traditional brewery specifications. In place of cost and time intensive permanent structures, it has adopted a design-driven approach in partnership with Herchenbach, a manufacturer of temporary buildings and semi-permanent warehouses. Full Story...

What role does refrigeration play in the supply chain?

Gently does it

Hygienic drainage for food safety

http://www.fponthenet.net/whitepapers.aspx?ShopItemID=1231