This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

'Fast, precice control' with valve booster

11 February 2011

A new design of booster which eliminates the time-consuming trial and error procedures associated with the fine tuning of control valves, is available from valve specialists Samson Controls

Thanks to its precisely manufactured bypass restriction, the booster can be adjusted exactly and lead-sealed in this set-up which results in valuable time saved, whilst also minimising potential start-up problems.

As the booster is completely pressure balanced it provides a stable output, even under fluctuating pressure conditions. The signal pressure is transmitted with a defined hysteresis, without loss (gain 1:1) and emits minimal noise.

Another important benefit is that only the booster’s functional parts come into contact with instrument air only, alternatively the booster’s exhaust air port can be protected from the weather or other environmental factors.

When used in combination with a positioner, the booster allows control valves with large pneumatic actuators to be controlled quickly and precisely, even in applications with high flow rates or significant pressure drops.


Contact Details and Archive...

Print this page | E-mail this page

RELATED CONTENT...


Article image The latest in valve technology

Food Processing caught up with five leading valve manufacturers to discover the latest news and technology in the sector.Full Story...

Article image Festo’s new VPPX valve gives increased process quality

Festo, the leading supplier of automation technology, has launched a new proportional valve VPPX with an external sensor input, and offers users improved performance, maximum flexibility and excellent process quality. Full Story...

Festo’s MPA-C valve terminal meets IP69K requirements

Process valve body design turns a corner...

GEMÜ further expands its expertise in the control valve sector with the innovative Type GEMÜ 566 globe valve

RELATED SPONSORED ARTICLES...


Article image Dixon opens new valve actuation workshop

Dixon Group Europe are proud to announce the opening of their new Valve Actuation workshop offering custom automated valve packages from their Preston offices, most of which can be dispatched within 24 hours thus reducing customer process downtime. All valves are tested prior to dispatch and issued with full certification.Full Story...

Article image Burkert 'closes control loop' with new ball valve + actuator and positioner combinations

Burkert UK has expanded its range of products for providing complete process solutions in the food, pharmaceutical, bio-technology, medical and water treatment sectors (et al), with the introduction of a range of 2/2 stainless steel ball valves, available manual or complete with quarter turn single or double acting rotary actuators, and the facility for low cost positioning control via Burkert’s innovative side control positioner

Full Story...

MOST VIEWED...


Article image Spray and save on the glazing process

Food glazes are widely used in the bakery sector to improve the look and taste of baked products. Traditionally, this coating process has resulted in substantial waste. Technology advances mean that this is no longer the case. Full Story...

Article image Your flexible friend in the food factory

Suzanne Gill finds out where thermal imaging technology can help around the factory. Full Story...

Self diagnostics: an enabler for predictive maintenance

A dry-ageing process improvement

What role does refrigeration play in the supply chain?

http://www.appetite4eng.co.uk