This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Spray nozzle 'copes with dirty or lumpy liquids'

01 July 2010

A new spray nozzle which is designed with the largest internal flow passage available of its type to ensure clog-resistant capability in an axial, full cone nozzle, is the latest addition to the BETE range of products

The MaxiPass L is suitable for low flow spraying applications where there may be contaminated or dirty liquids which can cause clogging problems with other types of nozzles. This means the problems of downtime and unplanned maintenance are minimised.

The nozzle incorporates the same critical internal S-shaped vanes which are used in the proven MaxiPass large flow nozzle. This design feature enables large particles to pass through the nozzle without creating a blockage, yet in a more compact size and for flows as low as 0.44 lit/min.

Available in ⅛” and ¼” pipe connection sizes the MaxiPass L delivers a full cone spray pattern in either narrow, medium or wide spray angles. The innovative S-shaped internal vanes allow a free passage of particles to ensure optimum reliability, even under the most challenging conditions where dirty or contaminated liquids are present.

Other features include high energy efficiency and uniform spray distribution across a range of flow rates from 0.44 up to 7.94 lit/min. The nozzle body is available in brass, 303 and 316 stainless steel while the vanes are made of 316 for optimum wear and corrosion resistance.

Contact Details and Archive...

Print this page | E-mail this page


Article image Air nozzle for rugged industrial applications

Exair's 1-1/4 BSP Super Air Nozzle, available from Good Hand UK and with zinc aluminium alloy construction, delivers 4.2kg of blowing force when mounted 300mm away from the targetFull Story...


Article image Spray and save on the glazing process

Food glazes are widely used in the bakery sector to improve the look and taste of baked products. Traditionally, this coating process has resulted in substantial waste. Technology advances mean that this is no longer the case. Full Story...

Article image What role does refrigeration play in the supply chain?

Controlling the temperature of food across the whole supply chain is vital to extend shelf life. But how much can be gained by food manufacturers through careful monitoring at all process stages?Full Story...

Self diagnostics: an enabler for predictive maintenance

Your flexible friend in the food factory

A dry-ageing process improvement