This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.;2714294;369307;211;0/?ft_width=1&ft_height=1&url=16151650

Customer online production costs cut

25 March 2010

How often do we see greater flexibility for less cost? Emka’s new 3-point cam adapter is said to offer just that. It converts a low cost single point cam into a cam for a 3-point locking system.

This gives enclosure manufacturers a much reduced stock requirement for varying cabinet door sizes, typically leading to a 40% reduction in stock costs on this component type.

OEM/Specialist cabinet producers up to now have needed to stock both single and 3 point cams, but now need only stock the popular and low cost single point item with a small quantity of adapters. The 1000 cam adapter is a precision zinc die component suitable for the complete range of Emka 1000 ¼ turn locks where the standard single point cam is appropriate.

Fixing is a single bolt operation and may be carried out in cabinet manufacture, at installation, or as a retro-fit, by removing the cam fixing bolt and refitting, then installing the rod system to the door, thus providing two more closure points for improved sealing and security on longer doors.

Further information on Emka products and services may be found at:, where it is also possible to download any part or the entire EMKA product catalogue.

Print this page | E-mail this page