This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Considering power quality

07 May 2017

Steve Hughes explains how electrical engineers can protect food manufacturing plants from power quality problems. 

Fluctuating consumer demand and tightening legal requirements has required food manufacturers to invest in new ways of operating effectively. This has, typically, involved investment in new technologies, from more efficient equipment to digital data-collection software.

However, this is not the only way that food production facilities are changing. In addition to the rising prevalence of data-collecting sensors and software, there are many new pieces of equipment being installed to improve process efficiency and product quality. 

In particular, plant managers are turning to packaging equipment that uses laser microperforation to control packaging airflow and therefore improve product shelf life. This equipment uses lasers to create very small and evenly spaced holes in packaging in a consistent and efficient fashion.

Each of these developments poses a challenge for the electrical engineer tasked with ensuring high plant power quality. Very few plant managers will consider whether it is necessary to upgrade power supplies when specifying new technology.

Laser microperforation equipment, for example, uses high frequencies that significantly hinder the performance of conventional power supplies. This means that usage of the equipment causes power quality problems, including voltage fluctuations that result in decreased laser power output and an unpredictable performance. If the equipment is not performing properly, it is unlikely that the food packaging will be as breathable as it should be and this leads to inaccurate best-before dates and a possible risk to consumers.

To address this problem, electrical engineers need to ensure that the equipment has an effective switch mode power supply (SMPS) that can handle the unique demands of the application. This can be challenging, as every operating situation is different and off-the-shelf power supplies may not be suitable for a particular set up.

REO UK, for example, designed its REOTRON SMP for customers needing a product that could make laser perforation equipment reliable. It uses specialised control algorithms on capacitive loads so engineers can maintain voltage and current accurately, leading to a lower project reject rate. It also features liquid cooling that can be easily connected to the existing liquid cooling systems used by most lasers.

The REOTRON SMP can also be connected to remote monitoring modules such as the REODATA-GSM. This provides performance data that plant managers can use to determine if and when maintenance is needed. As with the other data that plant managers must collect during the production process, electrical engineers should install effective power line communication (PLC) filters to remove harmonics that occur due to data transmission and high frequencies on power networks.

Steve Hughes is managing director of REO UK.


Contact Details and Archive...

Print this page | E-mail this page

RELATED CONTENT...


Article image PULS UK appoints business development manager

Din Rail power supply manufacturer PULS UK has appointed Kelly-Ann Bruce as business development manager to promote its range of products throughout the UKFull Story...

MOST VIEWED...


Article image Oil-free compressor breaks with tradition

Gardner Denver went back to the drawing board with the design for its new water cooled, oil-free compressor. The CompAir branded Ultima is said to offer improvements in energy efficiency of up to 12%, compared to a conventional two-stage machine. It also has a 37% smaller footprint. Full Story...

Article image Finding the key to successful BRC audits

David Wolf looks at the common pitfalls encountered by many food businesses when undertaking an audit and offers advice on the steps to take to make sure things run smoothly. Full Story...

New and used food processing machinery

What role does refrigeration play in the supply chain?

Food Processing Awards 2017 – first call for nominations