This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

New Advetec high temperature aerobic digester targets turns food waste into powder in 72 hours

15 February 2016

Advetec, a leading UK specialist in the use of advanced environmental technologies for the treatment of solid and liquid organic waste, has launched a new, enhanced version of its high temperature aerobic digestion process to reduce organic content in difficult to handle mixed solid waste and trommel fines.

By reducing the waste volume and extracting most of the water, the machines will significantly reduce waste disposal and transportation costs and provide opportunities for reuse.

The Rapid Thermal Organic Reduction system, or ‘RapTOR’, a development of the company’s successful Bio-Thermic Digester (BTD), has been reengineered to increase throughput and extend the range of difficult waste streams that can be processed. These include food waste, Organic Fines, sewage sludge and mixed solid waste (MSW), digesting organic content during a 72-hour cycle. 

The process is particularly suited to co-mingled waste where it is not possible to separate out organic residues, an increasing issue for waste management companies facing rising landfill penalties and pressure for a total ban on organics going to landfill.  Waste volumes with the next generation RapTOR has been increased and sustainable reductions between 45% up to 95% have been achieved depending on the waste stream. 

At its heart is a cocktail of extremophile bacteria and specially developed nutrients which thrive at high temperatures, rapidly digesting any organic material and extracting clean water to leave a waste product that can be used as RDF (Refuse Derived Fuel) or as a soil improver, depending on the input waste stream. 

Enhancements to the RapTOR include a new heat and moisture recovery system, to improve biological efficiency and reduce running costs. This takes heat generated by the exothermic process and re-used to sustain the high temperature environment for the bacteria. Consequently, operating costs drop after the initial start-up procedures. Water from steam is then condensed out and filtered for use in irrigation, cleaning or further processing. Moisture extraction and odour control are now built in to the systems as standard on all machines over 1 cubic meter per day waste volumes.

Other upgrades include an improved drive train to ensure a fully ruggedized solution with a ten-year design life, greater flexibility for waste in-feed options, plus uprated control software to give more refined process control and monitoring. Advanced remote telemetry means Advetec can now offer a complete managed service for customers, operating a machine 24/7 anywhere in the world, from its facility in the UK. 

Craig Shaw, CEO for Advetec says: “The RapTOR is available in a range of size configurations to suit different waste volumes and is completely scalable. Its ability to deal effortlessly with co-mingled waste and difficult to handle organics fills a significant gap in the market where composting and Anaerobic Digestion don’t have an answer.” 

“In the United States we already have extensive interest from waste management companies and large food courts, especially in States mandating no organic waste to landfill. We have a new machine going to Italy and our technology is being trialled by leading European waste companies.  Developments in the control software and remote monitoring to continuously optimise the operating environment and throughput of the system is an increasingly important feature and we are already operating machines in the Middle East and the US directly from our UK facility.”


Print this page | E-mail this page

MOST VIEWED...


Article image Spray and save on the glazing process

Food glazes are widely used in the bakery sector to improve the look and taste of baked products. Traditionally, this coating process has resulted in substantial waste. Technology advances mean that this is no longer the case. Full Story...

Article image Your flexible friend in the food factory

Suzanne Gill finds out where thermal imaging technology can help around the factory. Full Story...

What role does refrigeration play in the supply chain?

A dry-ageing process improvement

Self diagnostics: an enabler for predictive maintenance

http://www.appetite4eng.co.uk