This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

No PC required: Kaman’s digiVIT standalone inductive sensor for non-contact linear position and displacement measurement

09 November 2015

Kaman’s digiVIT is a precision inductive sensor system that can measure linear distance or displacement to any conductive target with nanometre resolution and accuracy.

Available from Kaman’s exclusive UK distribution partner Ixthus Instrumentation Ltd, the standalone digital variable impedance transducer provides easy set-up and calibration unlike fixed performance or analogue sensors. digiVIT calibrates itself for the specific sensor connected, the sensor cable length and whatever conductive target material is used. What sets digiVIT apart from other digital inductive linear displacement sensors systems is that all set-up functions can be accessed through 4 pushbuttons on the front panel with no need for connection to a PC – making configuration faster and easier for position, vibration and proximity sensing applications that include parts sorting, process control, laboratory test, engine dynamics testing and condition monitoring.

Kaman offers a range of compatible probe models with common linear measurement ranges that have been characterised to work with an aluminium target but digiVIT will perform with virtually any manufacturer’s inductive sensor on almost all conductive targets. Extension cables, calibration fixtures and spacers are also available from Ixthus as part of the digiVIT range.

The simple pushbutton guided set-up procedure can be configured for 2-, 6-, or 21-point linearity calibration. Simply put, digiVIT automatically detects the coil parameters of the target sensor and the built-in bridge balances the circuit - achieving optimum and repeatable performance for the calibration range and target material. Pushbutton temperature compensation and zeroing is also provided with equally simple set-up via the intuitive 4-button tactile keypad. All information is presented on an easy to read digital display that reveals percentage of full scale (default), or a choice of voltage or current output values. Analogue output options are selectable from 0-5 VDC, 0-10 VDC (default), +/- 5 VDC, +/- 10 VDC, 4-20 mA and 0-20 mA.  An EtherNet port is also provided that may be used to read values and switch parameters over a network, such as the analogue output type. 


Print this page | E-mail this page

MOST VIEWED...


Article image Spray and save on the glazing process

Food glazes are widely used in the bakery sector to improve the look and taste of baked products. Traditionally, this coating process has resulted in substantial waste. Technology advances mean that this is no longer the case. Full Story...

Article image Your flexible friend in the food factory

Suzanne Gill finds out where thermal imaging technology can help around the factory. Full Story...

A dry-ageing process improvement

Automating the temperature monitoring task

What role does refrigeration play in the supply chain?

http://www.appetite4eng.co.uk