This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

https://servedby.flashtalking.com/click/2/82776;2714294;369307;211;0/?ft_width=1&ft_height=1&url=16151650

Pump system is perfect for pastes and high viscosity products

13 October 2015

Transferring high viscosity creams, pastes and gels which do not flow readily, such as peanut butter, shaving cream, petroleum jelly, yeast extracts and mascara, present unique challenges across many process applications in the food, cosmetic and pharmaceutical industries. 

In many cases operators revert to manual handling solutions due to the limitations of some pumping systems and this can result not only in wastage issues but also those of a health and safety nature.

An effective and practical solution is available from liquids handling specialists PUMP ENGINEERING who offer a CSF piston pump mounted in the centre of a follower plate which fits into a drum and seals against the inside of the drum.  Two pneumatic cylinders force the plate onto the top of the product and as the pump empties the drum, the plate is drawn  downwards keeping the inlet of the pump full of the product. A rubber seal on the follower plate effectively wipes the side of the drum as it travels downwards, sealing it and ensuring that very little product is wasted. 

The pumps are available as quick-strip versions for easy cleaning without the need for tools. For lower viscosity liquids, a long version of the pump is available for emptying tanks, drums and IBC’s which features a special bag-in-drum inlet which prevents the plastic drum lining used in some industries being drawn into the pump. 

CSF piston pumps are air operated and depending on the model, will deliver flowrates up to 100 litres / minute with pressure ratios up to 20 to 1. Materials of construction are AISI 304 or 316 stainless steel with Viton, nitrile or PTFE seals.


Print this page | E-mail this page

MOST VIEWED...


Article image Anheuser-Busch InBev’s distribution strategy model

Over the past 10 years Anheuser-Busch InBev (A-B InBev) has grown its global distribution network using a strategy which goes against the grain for traditional brewery specifications. In place of cost and time intensive permanent structures, it has adopted a design-driven approach in partnership with Herchenbach, a manufacturer of temporary buildings and semi-permanent warehouses. Full Story...

Article image What role does refrigeration play in the supply chain?

Controlling the temperature of food across the whole supply chain is vital to extend shelf life. But how much can be gained by food manufacturers through careful monitoring at all process stages?Full Story...

Getting the best out of PLCs

Gently does it

Time to take steps to reduce plastic waste

http://www.fponthenet.net/whitepapers.aspx?ShopItemID=1231